Maverick Valves

Sub Sea Valves

Maverick Valves Manufacturing HQ manufactures complete integrated units of subsea valve, actuator and ROV receptacle tool.

With a very strong Quality Assurance and Engineering Dept., MVM HQ is able to design and manufacture the most specific and customized actuated valves according to the project requirements.

Subsea Valves and actuators are critical components of any offshore installation.

Any subsea intervention is costly, time-consuming and extremely difficult, and any failure would result in loss of profit for the Operators and End Users.

Type of applications

• Pipeline subsea valves
• Subsea Manifolds
• Line tees for future tie-ins
• Jacket flooding valves
• SSIV (Sub Sea Isolation Valves)
• PLEM ESDV and On/Off Valves
• Semi-submersible Buoy and Turret

Type of valves used in subsea environments

Ball Valves

• Generally Piggable type, they are used normally in subsea pipeline
• Possibility of Seat design metal to metal with tungsten carbide coating.
• Corrosion Resistant Alloys on valve dynamic sealing parts and ring joint grooves
• Redundant sealing, for increased reliability of the valve

Through Conduit Slab and Double Expanding Gate Valves

• They are used normally in subsea manifolds or pipelines when there are fluid mixes of liquid, gas, and sand.
• The valve design is suitable for a high percentage of sand or solid particles
• inside the fluid and very high pressure (normally above 5000 psi)
• Thanks to their Through Conduit Design, they are fully Piggable.
• Possibility of Seat design metal to metal with tungsten carbide coating.
• The Double Expanding Gate Valves are used when a DB&B is required for isolating the downstream cavity