VIP - Pneumatic Coaxial Valve
1. Internal diameter equal to the diameter of the pipe
High flow capacity
2. Pneumatic actuator integrated in the valve
Space saving (-60%) and reduced costs compared to an automated valve
3. Piston with chemical nickel plating (20-25 micron)
Lower wear of the seals due to the increase of the surface hardness (400 -550 HV)
4. Lip seals
Less wear of the seal comparing with an o-ring
Several seal materials available
Maximum compatibility with different types of fluids depending by the seals used
No external moving parts
Maximum safety
Easy mounting
Long life time granted
Lifetime 10 times longer than a ball valve with with reduced maintenance costs
100% in- house manufacturing process technology
Maximum control and accuracy in all the stages of the manufacturing process
Less Air consumption
80% less air consumption compared to an actuated valve with SR pneumatic actuator therefore less load on the compressor or the possibility of using a smaller compressor's size.
ATEX Certificate
Installation is allowed in a potential explosive environment
PED Certificate
Full compliance with European Safety Standards for Pressure Equipment
