Swing Check Valves
The swing check valve is used to prevent back flow in the line. Flow is in a straight line through the valve resulting in minimal pressure drop. The disc swings into the open position as the media flows through the line. Back pressure in the line holds the disc in the closed position.
Swing check valves may be installed in horizontal or vertical lines, but must be installed in proper relation to the media flow as indicated by the flow direction arrow marked on the body.
Ladish Valves swing check product line are manufactured as full port, threaded, socket-weld, flanged or weld end body types. Pressure classes include 150 through 1500. From our Houston manufacturing facility we offer valves in the following materials: CF8M, CF3M, CF8, CF3, CK20, CG8M, CF8C, CN7M, CW12MW, CY40, CW6MC, N12MV, N7M, M35-1, CZ100, CD3MN and many others.
- Disc Assembly Hinged From Bottom of Cover
- Metal/Renewable Disc Available
- Flanged, Butt Weld, Threaded and Socket Weld End Connections Available
- Valve Design per ASME B16.34
- 2 ½” and 5” Sizes Available