Category : Process Automation and Controls
Key Products : Transmitters, Pneumatic Repeaters, and Control Valves for Paper Industry
OMD is an atmospheric oil mist detection instrument for marine and industrial applications, developed for installation in machinery room, pump room, etc. in commercial, naval, ro-ro ships as requested by the actual international IMO marine regulations (circ.1086). The OMD detector is an independent measuring and transmitting system with 4÷20mA+HART® and photorelays output, proportional to the density of oil mist in the sampled air.
The air filter regulator FR 10 is specially designed for feed, with clean air and controlled pressure, all the measuring and control instrumentation, automatic machine and any type of pneumatic device. The high precision of control and its constructive characteristics amake it particularly reliable even in environmental heavy condition.
The T7C series consistency transmitter detects the strength of shear generated by the interaction between the sensor and the blade fibers / fillers contained in the pulp and converts linearly the values ??of the cutting force in a signal 4 to 20mA + HART. The output signal, proportional to shear force, it varies depending on the type of pasta that flows in the pipe (recycled paper, short fiber pulp or long), the type of charge and the amount by determining the measuring range.
The monitoring and recording of the sheet quality of finished paper, or other materials, are operations essential in the industry of paper production, plastic, ceramics. The meter industrial shiny T7G allows the measurement of the degree of gloss of the surface of the product in continuous scrolling, both on a calender, is in the final stage of processing, in order to make reading independent of the variables encountered in this type of applications. The meter is shiny T7G was developed as a robust tool, reliable and it equipped with self-diagnostic, suitable for use in automatic processes and can be fixed on machine and to provide appropriate signals to a analog recorder or a PC. this allows the operator or monitor of the control system in real time any deviations of the value of shiny from the settled and adjust the Tool according to your production needs