Varadan Automatic

varadan

Shower and Oscillator

By using needle jet nozzles and synchronizing the oscillation speed with the machine advancement speed you can obtain perfectly parallel strips, thus avoiding the formation of un-cleaned areas and overlapping of sprays. All this guarantees better cleaning and longer life for wires and felts, as well as decreased water consumption.

Shower headers for Low pressure Lubricating and High Pressure showers. In SS 304, 316, 316L. Pressure rating 3 to 60 Bars.

Varieties of Nozzles, fanjets, Fish tall jet, Flat jet, Wide angle, Narrow angle, high impact, Foam killing Mist cooling High Pressure Needle jets.

Self Cleaning Shower

As with all modern paper machines, showering of the forming and press fabrics is critical to efficient operation. And, as with most modern industry, demands for increased efficiency have required now and innovative approaches to reduce required maintenance time. To reduce maintenance efforts on the paper machines, a Microtravel oscillator is installed.

Oscillators

Why Oscillate Showers? Since needle jets work in much localized areas of the fabric equal to or slightly greater than the nozzle stream diameter, they only cover small portions of the total fabric area at a given time. Typically, nozzles are spaced about every 100 to 150mm on a pipe and are rarely closer than 75mm for a forming fabric and 100mm for a felt. The shower must therefore be moved back and forth across the fabric so that the cleaning is performed over the whole area

Microtravel Fixed Speed Oscillator

Manufacturer, exporter and supplier of Microtravel Variable Speed Oscillator. - Gv Oscimatic. Our range of Microtravel Variable Speed Oscillator. - Gv Oscimatic is available with following features and specifications:

Fixed Speed Oscillator

  • ALL SS 316 CONSTRUCTION FOR VERY WET CONDITIONS.
  • STROKE LENGTHS- AVAILABLE FROM 100 TO 300 MM.
  • VARIABLE SPEEDS FROM 5 TO 75 MM/MIN Suitable for Machine speeds from 200 to 1500 Mtrs/min.
  • AUTO SYNCHRONIZATION WITH MACHINE SPEED.
  • INTERFACE WITH HP PUMP.
  • OIL DIPPED MECHANISM: - ZERO MAINTENANCE.
  • TRANSVERSE SCREW ARRANGEMENT- NO DWELL TIME.
  • INDUCTION MOTOR, TEFC, 90 W, 220V, 3 Phases.
  • PLANETARY GEAR BOX GREASED FOR LIFE.
  • SS 316, ENCLSOSURE- IP 55.

Control Panel for Oscillator

As with all modern paper machines, showering of the forming and press fabrics is critical to efficient operation. And, as with most modern industry, demands for increased efficiency have required new and innovative approaches to reduce required maintenance time. To reduce maintenance efforts on the paper machines, a Microtravel oscillator is installed.
Shower headers for Low pressure Lubricating and High Pressure showers. In SS 304, 316, 316L. Pressure rating 3 to 60 bars.